How to Choose an Applicant Tracking System

May 19, 2026
Min Read time

Organisations choose an applicant tracking system based on a compelling demo and then spend the next two years working around its limitations. Choosing the wrong ATS is a slow, expensive mistake — partly because the data you build up inside it makes switching painful, and partly because the demo is specifically designed to prevent you noticing the gaps. This article covers how to choose an applicant tracking system that fits your actual process, not the process the vendor assumes you have.

Table of Contents

Choosing an ATS is one of those decisions that feels lower-stakes than it is.

It's software. You try it, if it doesn't work, you switch. Except you've now spent three months migrating candidate data, retraining the recruitment team, rebuilding your job templates, and re-establishing integrations with your HRIS and job boards. Switching ATS platforms is not a Friday afternoon job. Which is why getting the initial decision right matters more than the subscription cost suggests.

The ATS market contains several hundred platforms, every one of which will tell you it's intuitive, flexible, and perfect for your needs. Some of them are right. Here's how to work out which.


Start With Your Process, Not the Platform's Features

The most reliable way to choose the wrong ATS is to watch a demo first.

A demo shows you what the platform can do. What you need to know is whether what the platform can do matches how your organisation actually hires. Those are different questions, and the demo is not designed to surface the gap between them.

Before you look at a single platform, write down your recruitment process as it actually works today. Not as it should work — as it does. How many people are involved in a typical hire? What stages does a candidate move through? Where do decisions get made? What systems does recruitment need to connect to — your HRIS, your payroll, your background check provider, your calendar?

Now write down the three things in your current process that cause the most friction. Candidates falling out of contact. Interview feedback arriving too late to be useful. No visibility on where roles stand. Compliance documentation scattered across inboxes. These are your selection criteria. The right ATS is the one that addresses them. Everything else is a feature you might use eventually.


What to Look For in an Applicant Tracking System

  1. Ease of Use for Everyone, Not Just HR

An ATS benefit that only HR can navigate will be used only by HR. Hiring managers who find the system confusing will revert to email. Interviewers who can't submit structured feedback will submit unstructured feedback, or none at all. The system becomes a record-keeping tool for completed decisions rather than a tool that improves the decisions themselves.

When evaluating ATS platforms, put the hiring manager interface in front of an actual hiring manager and watch what happens. Not a technically confident one. The one who struggles with software and has thirteen browser tabs open at all times. If they can find the candidates, review the shortlist, and submit feedback without a training session, the platform is usable. If they need guidance to get through basic tasks, you will be providing that guidance indefinitely.

  1. Integration With Your Existing Systems

An ATS that doesn't talk to your HRIS creates duplicate data entry. One that doesn't post automatically to the job boards you actually use means someone's manually logging into five platforms every time a role opens. One that doesn't connect to your calendar means interview scheduling is still a chain of emails.

Before getting attached to any platform, confirm exactly which integrations are available, which are native and which require third-party middleware, and what each one costs. The phrase "we integrate with everything" is marketing. The question is whether it integrates with the specific things you use, at the tier you're considering purchasing.

  1. Structured Assessment and Scorecard Capability

One of the primary benefits of an ATS is enabling consistent, structured hiring decisions. If the platform doesn't support custom interview scorecards — where every interviewer assesses the same criteria, in the same format, for every candidate — it's not delivering that benefit. It's an administrative tool with a pipeline view.

Scorecards are non-negotiable for any organisation serious about quality of hire. Check whether they're available on the plan you're evaluating, not just on the enterprise tier, and whether they're genuinely customisable to your competency framework or fixed to a template you'd have to work around.

  1. Candidate Communication Tools

Every candidate should receive timely, professional communications at every stage — acknowledgement of application, confirmation of interview, outcome notification. In most organisations without an ATS, this happens inconsistently because it depends on someone remembering to send it.

Automated candidate communications are a standard ATS feature, but the quality varies significantly. Check whether templates are customisable, whether communications can be personalised beyond the candidate's first name, and whether the automation is intelligent enough to trigger at the right stage or whether someone still needs to manually initiate it.

  1. Reporting That Answers Strong Questions

Every ATS offers reporting. The question is whether the reports it generates answer the questions worth asking — not just application volumes and stage counts, but time in stage, source quality, offer acceptance by candidate rank, drop-out rates by role type.

Ask every platform you evaluate to show you the five reports your team would use most. Not a report library. The actual reports, with actual data in them. Then work out whether those reports are available on your intended tier or whether they require an analytics upgrade.

  1. ATS Selection by Company Size

The right ATS for a twenty-person company is not the right ATS for a five-hundred-person company. The selection criteria overlap, but the scale requirements don't.

For small businesses making fewer than thirty hires annually, the priority is simplicity over sophistication. Breezy HR, Teamtailor, and Zoho Recruit are worth evaluating. Free tiers are functional at this scale. The things to check are: does it post to the job boards you use, does it handle basic candidate communications, and is it something a non-technical user can operate without support? Anything more is probably overhead you don't need yet.

For mid-market organisations making thirty to a hundred hires annually across multiple functions, the priorities shift toward integration depth, structured assessment capability, and reporting. Greenhouse, Lever, Pinpoint, and Ashby are strong options in this range. Pinpoint is worth specific attention for UK teams — it's built for in-house talent functions, integrates well with UK job boards, and its reporting is more accessible than most enterprise platforms at this scale.

For enterprise organisations with high volume, complex workflows, and multi-geography hiring, the shortlist typically includes Workday Recruiting, iCIMS, SAP SuccessFactors, and Greenhouse at the larger end. The selection process becomes less about feature comparison and more about implementation capacity, compliance infrastructure, and integration with existing enterprise systems. The procurement cycle is longer, the contracts are bigger, and the cost of getting it wrong is proportionately higher.


Questions to Ask Before You Commit

Most ATS demos are conducted by people whose job is to show you what the platform can do. These questions are designed to surface what it can't.

What happens to our data if we leave?

Can you export everything — candidate records, assessment notes, communications history — in a usable format? How long does it take? Is there a cost? The answer to this question tells you something about how the platform thinks about the relationship.

Which features are on which tier?

Get this in writing. The scorecard you need, the reporting view you want, the integration with your HRIS — confirm exactly which plan includes each one before the pricing conversation happens.

What does implementation actually involve?

How long does onboarding take? Is there a cost beyond the subscription? What level of technical resource do you need on your side? For small HR teams without dedicated technical support, a six-week implementation project is a meaningful commitment.

Who provides support and how quickly?

Basic helpdesk support is standard. Priority response, dedicated account management, and hands-on onboarding support are often premium add-ons. For teams without internal technical resource, the support model matters more than most buyers acknowledge until they need it.

Can we speak to a customer at our size and hiring volume?

Not a reference the vendor selects. Ask for a list of current customers at comparable scale and reach out to one independently. The conversation is worth more than any case study.


Avoiding The ATS Demo Trap

ATS demos are conducted on the enterprise tier. The platform looks capable, configurable, and impressively functional. You ask a question and the answer is always yes. The reporting is comprehensive. The integrations are seamless. The AI features are compelling.

Then you receive a quote for the plan that fits your budget, and several of those features aren't on it. The advanced analytics are on the tier above. The AI matching requires an add-on. The HRIS integration you saw in the demo is available, but through a third-party connector that costs extra.

Ask to be demoed specifically on the plan you'd purchase. If the vendor is reluctant to do this, that is itself an answer.


How SquareLogik Approaches ATS Selection

We're not ATS resellers and we don't have a preferred platform to steer you toward. What we've seen, working across different organisations and their hiring processes, is that the ATS decisions that work out are made by people who defined their requirements before they started talking to vendors — and the ones that don't are usually made the other way round.

If you're evaluating ATS platforms and want a straight opinion on whether a particular tool is likely to suit your process, we're happy to give one.  


Frequently Asked Questions

How do you choose the right applicant tracking system?  

Start by documenting your actual hiring process and identifying the specific friction points you need to solve — not the features you'd like to have. Use those friction points as your selection criteria. Then evaluate platforms on how well they address those criteria specifically, checking which features sit on which pricing tier and confirming integrations with your existing systems before you commit. The right ATS is the one that fits how you hire, not the one with the most impressive demo.

What features should I look for in an ATS?  

The most important features for most organisations are: an intuitive hiring manager interface that non-technical users can navigate without training; native integrations with your HRIS, calendar, and primary job boards; structured interview scorecards that enable consistent, comparable candidate assessment; automated candidate communications with customisable templates; and reporting that tracks source quality, time in stage, and offer acceptance rates. Everything else should be evaluated against whether you'll actually use it, not whether it's impressive in a demo.

What is the best ATS for small businesses?  

For small businesses making fewer than thirty hires annually, Breezy HR, Teamtailor, Zoho Recruit, and Freshteam are all worth evaluating. Free tiers are functional at this scale. The priorities are simplicity of use, job board integration for the boards you actually use, and basic candidate communication automation. Sophisticated analytics and AI-assisted features are generally unnecessary overhead at small business hiring volumes.

How long does it take to implement an ATS?  

For SME platforms, implementation typically takes two to four weeks with reasonable internal resource. For mid-market platforms with HRIS integrations and custom workflows, four to eight weeks is more realistic. Enterprise deployments regularly run three to six months. Ask the vendor specifically what implementation involves on your side — internal time, technical resource required, and any additional cost beyond the subscription — before you sign.

Should I choose an ATS with AI features?  

AI features in ATS platforms — candidate matching, CV screening, predictive analytics — can genuinely improve sourcing efficiency and shortlist quality when the hiring volume justifies them. They're less useful when your candidate pool is small, when the roles are highly specialist, or when the AI has been trained on data that doesn't reflect the candidate profile you're looking for. Evaluate AI features on evidence of what they actually do in practice, not on how compelling they sound in the demo.

What are the most common mistakes when choosing an ATS?  

Choosing based on the demo rather than a defined set of requirements. Not confirming which features are on the plan you'd actually purchase. Failing to test the hiring manager interface with a non-technical user. Overlooking the implementation cost and timeline. Not asking about data portability and exit terms. And selecting a platform sized for a much larger organisation when a simpler, cheaper tool would have solved the same problems with less overhead.

Related Articles

June 2026
Read time

The Business Case: Why Is Employee Retention Important?

Employee retention is universally agreed to be important and consistently treated as a second-order priority. Here's the cost of getting it wrong.

Ask any senior leader whether employee retention is important and the answer is yes. Immediately, confidently, yes.

Then ask them what their organisation's current employee retention rate is, what it cost them in turnover last year, or what their strategy is for improving retention. The answers get quieter.

The importance of employee retention is universally acknowledged and routinely deprioritised. It lives in the space between things everyone knows matter and things that get proper budget, proper measurement, and proper strategic attention. Usually because the cost of poor retention is spread across enough budget lines — recruitment, training, temporary cover, productivity loss — that no single number announces itself clearly enough to trigger urgency.

This article assembles that number. And explains why, once you see it properly, employee retention stops being a soft HR concern and starts looking like one of the most significant financial levers in the business.


The Cost of Employee Turnover

The importance of retaining staff becomes most visible when you calculate what losing them costs.

The frequently cited figure from the Chartered Institute of Personnel and Development puts the average cost of replacing an employee at £30,000 once recruitment, training, and lost productivity are properly accounted for. The Recruitment and Employment Confederation estimates a poor hire at mid-manager level can cost upwards of £132,000. Even conservative estimates of turnover cost — those that count only the obvious, direct expenses — consistently produce numbers that surprise the finance teams reviewing them.

The components of turnover cost break down across several categories. There are the visible costs: recruitment advertising, agency fees, interview time, onboarding, and initial training. Then the less visible ones: the productivity gap while a role is vacant, the reduced output of a new hire during the months before they reach full effectiveness, the additional workload absorbed by the team covering the gap, and the institutional knowledge that walks out with every departure.

Then there is the compounding effect. A resignation rarely happens in isolation. Key departures create instability that increases the resignation risk of those who remain. High turnover signals something to the people still there — about the health of the environment, about whether the leadership is managing things well, about whether they should be updating their own CV. The cost of one departure can therefore exceed its own direct cost by contributing to the next one.

Why is staff retention important? Because the alternative is expensive in ways that most organisations haven't fully modelled. Once they do, retention moves from "nice to have" to "financially urgent."


Employee Retention and Productivity

The relationship between retention and productivity is direct and consistent — and frequently overlooked because productivity is hard to attribute and easy to assume.

A stable, experienced workforce produces more than an unstable, frequently rotating one. This is not complicated. People who have done a job for two years are better at it than people who have done it for two months. They know the systems, the customers, the quirks of the processes, and each other. They make fewer mistakes, resolve problems faster, and require less supervision.

The inverse is also consistently true. High turnover creates a workforce perpetually at the bottom of the learning curve — always training, always onboarding, always catching up. Teams operating in a high-turnover environment spend a disproportionate amount of their time managing the consequences of instability rather than delivering at the level a stable team would.

Employee retention and business performance are not loosely correlated. They are tightly connected in ways that show up in customer satisfaction scores, delivery timelines, error rates, and revenue. Businesses with high retention rates consistently outperform those with high turnover on operational metrics — not because they've found some separate performance ingredient, but because stability is itself a performance ingredient.


Why Retention Matters for Company Culture

Culture is one of those words that gets deployed extensively and defined rarely. In practice, organisational culture is largely the accumulated behaviour of the people in it — the norms they've developed, the ways they've learned to work together, the values that have been demonstrated rather than merely stated.

High employee turnover erodes this systematically. Every departure removes someone who carried institutional knowledge, established working relationships, and cultural context. Every new hire brings someone who needs to be integrated, who doesn't yet understand the unspoken parts of how the organisation works, and who — in the period before they're fully settled — is assessing whether this is somewhere they want to stay.

An organisation with consistently high turnover never fully develops the cultural depth that makes it a genuinely good place to work. The culture stays shallow, the relationships transient, and the institutional memory thin. Which makes it harder to attract the people who care about culture — which is, increasingly, most of the people worth attracting.

Retaining employees is not just a cost or a productivity consideration. It is a prerequisite for having a culture worth talking about. The companies most frequently cited as great places to work are almost universally companies with above-average retention. This is not coincidence.


The Competitive Dimension: Retention as a Talent Strategy

In competitive labour markets — which describes most professional, technical, and specialist sectors — retention is a competitive advantage in a specific and underappreciated way.

Every employee you retain is an employee your competitor doesn't get. Every experienced team member who stays with you is accumulated capability that isn't being rebuilt from scratch somewhere else. And in sectors where skilled talent is scarce — technology, healthcare, finance, engineering — the gap between a stable experienced team and a high-turnover one compounds significantly over time.

Why is retention important in HR terms? Because the HR function's ability to deliver on any other strategic priority — quality of hire, employer brand, workforce planning — is substantially constrained by an inability to retain the talent it has already found. Recruitment that fills a revolving door is expensive and demoralising. Recruitment into a stable, growing team is entirely different.

High turnover also affects employer brand in the labour market in ways that are slow to accumulate and fast to damage. Word travels. Glassdoor exists. Candidates talk to former employees before accepting offers. An organisation with consistently high attrition develops a reputation in its relevant talent community that makes attracting the next generation of candidates harder, more expensive, and slower than it would otherwise be. Employee retention and company reputation are the same story told from different angles.


The Customer Impact of Employee Retention

The importance of employee retention extends beyond the internal — it reaches the people the organisation is there to serve.

Customer relationships are built by people, not organisations. The account manager a client trusts, the support specialist who knows their history, the engineer who understands the system — these relationships have value that doesn't survive a departure intact. A client who has dealt with three different account managers in two years is a client who is quietly evaluating their options.

In service-intensive industries — professional services, healthcare, financial advice, care — the stability of the staff a customer or service user interacts with directly affects the quality of what they experience. This is especially true in healthcare and social care, where continuity of care is not merely a satisfaction variable but a clinical one. But it applies across sectors wherever the quality of the relationship is part of the product.

Retaining employees is, from this angle, a customer retention strategy. The two are connected more directly than most organisations explicitly acknowledge.


Our Opinion on the Importance of Retention

We track retention for every candidate we place — at three months, six months, and twelve months — because we think the placement fee is the beginning of whether the hire worked, not the end.

That data tells us things that improve the quality of every subsequent search for the same client. Where early attrition is consistently occurring, there is almost always something in the brief, the role, or the working environment worth examining before the next search begins. We'd rather surface that conversation than fill the same role repeatedly and pretend the pattern isn't there.

The importance of retaining staff is not lost on us. It's the reason quality of hire — not speed, not volume — is the metric we care about most.


Frequently Asked Questions

Why is employee retention important?

Employee retention is important because turnover is expensive, productivity is higher in stable teams, institutional knowledge is lost with every departure, and culture cannot develop depth in a high-attrition environment. Beyond the internal costs, retention affects customer relationships, employer brand, and competitive positioning in the talent market. The cost of poor retention — when recruitment fees, lost productivity, training, and cover costs are properly accounted for — consistently exceeds what organisations have budgeted for it.

What is the cost of high employee turnover?

The CIPD estimates the average cost of replacing an employee at £30,000, accounting for recruitment, training, and productivity loss. At senior levels, costs are considerably higher — the REC estimates a poor mid-manager hire can cost over £132,000. Beyond direct costs, high turnover creates compounding effects: remaining employees absorb additional workload, institutional knowledge is lost, team stability erodes, and employer brand in the talent market deteriorates. The total cost of high turnover is almost always greater than organisations estimate when they add it up.

How does employee retention affect business performance?

Directly and significantly. Stable, experienced teams produce more, make fewer mistakes, resolve problems faster, and require less management supervision than teams in constant flux. High turnover keeps a workforce perpetually at the bottom of the learning curve. Businesses with above-average retention consistently outperform those with high attrition on operational metrics — not because they've found some separate performance advantage, but because workforce stability is itself a performance advantage.

Why is staff retention important for company culture?

Culture is built by the people in an organisation over time — the norms, relationships, and shared understanding that develop through sustained interaction. High turnover erodes this systematically, keeping culture shallow and institutional memory thin. Organisations with consistently high retention develop stronger cultures, deeper working relationships, and a more coherent identity — which in turn makes them more attractive to the people who care about culture, which increasingly includes most of the candidates worth attracting.

How does employee retention affect customers?

Customer relationships are built by people, not by organisations. Account managers, advisors, specialists, and care workers who leave take relationship capital with them. Clients who deal with multiple different contacts in a short period experience a reduced quality of service regardless of the technical capability of each individual — because the relationship itself is part of the product. In service-intensive sectors, high staff turnover is experienced by customers as inconsistency, and inconsistency erodes trust.

What is the link between recruitment and employee retention?

Early attrition — employees leaving within their first year — is consistently and predictably connected to the recruitment process. Candidates hired against a clear brief, assessed for genuine fit, and given an honest picture of the role are significantly less likely to leave within twelve months. The key drivers of retention — realistic expectations, values alignment, role fit — are either established or missed during the recruitment process itself. Treating recruitment and retention as separate strategies misses the most direct lever available for improving retention outcomes.

June 2026
Read time

How to Calculate Employee Retention Rate (Formula + Guide)

Most organisations either don't measure employee retention rate or measure it inconsistently. Here's the formula, how to segment it properly, and what the number means.

The employee retention rate formula is not complicated.

It is, in fact, one of the simpler calculations in HR metrics — which makes it all the more surprising how many organisations either don't calculate it at all, calculate it differently from quarter to quarter, or calculate it correctly and then do absolutely nothing with the result.

Knowing your retention rate without understanding what's driving it is a bit like knowing your car's fuel consumption without knowing there's a hole in the tank. The number exists. It is not helping you.

This article covers how to calculate staff retention rate properly, which variations are worth knowing, how to segment the data so it's diagnostic rather than decorative, and what a good retention rate looks like across different sectors.


The Employee Retention Rate Formula

The standard retention rate formula in HR is:

Employee Retention Rate = (Number of employees who stayed for the entire period ÷ Number of employees at the start of the period) × 100

In practice: if you started the year with 200 employees and 170 of them were still in post at year end, your annual retention rate is 85%.

That's it. The maths is straightforward. What requires more thought is what you count, what period you measure, and how you segment the result.


Defining the Variables in Employee Retention Rate

The formula has two variables, and both require clear definitions before the calculation means anything to your employee retention strategies.

"Employees at the start of the period."

This seems obvious. It usually isn't. Do you include employees on long-term sick leave? Those on maternity or paternity leave? Fixed-term contractors? Employees who joined and left within the same period — do they count as having been there at the start? Organisations that haven't defined this end up with staff retention calculations that aren't comparable across periods or departments.

The cleanest approach: count everyone on payroll on the first day of the measurement period, excluding contractors and agency workers unless you specifically want to measure their retention. Include employees on leave — they're still employed.

"Employees who stayed for the entire period."

This means employees who were employed at both the start and the end of the period, continuously. Someone who left and was rehired within the period does not count as having stayed. Someone on long-term leave who remained on payroll throughout does.

New hires who joined during the period are excluded from the calculation entirely — they weren't employed at the start, so they can't have stayed for the whole period. They'll enter the calculation in the next period.

Once these definitions are documented and applied consistently, the retention rate calculation becomes genuinely comparable over time. Without that consistency, you're measuring slightly different things each quarter and wondering why the trend line doesn't make sense.


How to Measure Employee Retention Rate Over Different Periods

Annual retention rate is the most commonly reported figure, and the most useful for year-on-year comparison and benchmarking. But it's a lagging indicator — it tells you what happened over twelve months, not what's happening now.

Monthly and quarterly retention rates give a more current picture and are more useful for identifying the specific point at which attrition is accelerating. If your quarterly calculation shows retention dropping sharply in Q3 every year, that's a pattern worth investigating rather than an annual average that smooths it out.

The same formula applies regardless of period — simply substitute the period-appropriate headcount figures. A monthly retention rate of 98% sounds healthy until you annualise it, at which point it represents a 24% annual attrition rate. Knowing which period to report for which purpose is the practical skill here.

Some HR teams also measure new hire retention rate separately — tracking specifically whether employees hired in a given cohort are still in post at the three-month, six-month, or twelve-month mark. This is the most sensitive indicator of onboarding and early-tenure problems, and it's the calculation that most directly reveals whether new hires were right for the role from the outset.


Segmenting Employee Retention Data

A single company-wide retention rate is the average of potentially very different situations. On its own it's interesting. Segmented properly, it becomes diagnostic.

By department or team.

If your overall retention rate is 87% but one department is at 70% and another at 95%, the company-wide figure is hiding the real story. Consistently low retention in a specific team almost always points to a management problem, a culture problem, or a role design problem that's invisible in the aggregate.

By tenure.

Early attrition — employees leaving within their first year — is structurally different from mid-tenure attrition. The causes are different, the interventions are different, and the costs are different. An organisation with strong twelve-month retention but poor three-year retention has a different problem from one losing people in the first six months. Most organisations don't separate these.

By role type or seniority.

Losing senior people is more expensive and more disruptive than losing entry-level hires. A retention rate that doesn't distinguish between levels may look acceptable while masking a serious leadership attrition problem.

By hiring source.

If employees hired through referrals retain at 92% and those hired through job boards retain at 74%, that's a sourcing strategy insight dressed up as a retention metric. Tracking retention by hiring source is one of the most underused analytical tools available to HR teams and one of the most actionable.


What Is a Good Employee Retention Rate?

Across UK organisations, an annual retention rate of 85 to 90% is broadly considered healthy — meaning 10 to 15% annual staff turnover. Whether that's good depends heavily on sector.

Professional services, financial services, and technology companies frequently achieve retention rates of 90% or above. At the other end of the scale, hospitality, retail, and social care regularly see retention below 75%, reflecting the specific labour market and working condition pressures of those sectors.

For context by sector:

  • In healthcare and social care, a retention rate above 80% represents strong performance relative to the sector average.  
  • In construction and manufacturing, 85 to 88% is typical.  
  • In technology at senior levels, anything below 88% warrants attention given the cost of technical talent and the speed at which replacements need to be found.

The most useful benchmark is your own trend compared to your sector average. A retention rate of 83% improving from 78% last year is a different story from the same 83% declining from 91%. Directionality matters as much as the absolute number.


The Limitations of the Retention Rate Calculation

The retention rate tells you how many people stayed. It tells you almost nothing about why — or whether the people who stayed were the ones you'd have chosen to keep.

Retention without quality analysis is incomplete. An organisation retaining 92% of its workforce sounds impressive until it turns out that a third of those retained are underperforming in ways that haven't been addressed. Retention of the wrong people is not a success metric. It's a different problem.

Similarly, an organisation with 80% retention might have lost its five highest performers while retaining the thirty who had nowhere else to go. The retention rate doesn't distinguish. Tracking which employees are leaving — by performance tier, by seniority, by the extent to which their departure was regrettable — turns a retention metric into a talent management metric.

Voluntary versus involuntary turnover is also worth separating in the calculation. Dismissals, redundancies, and fixed-term contract endings are structurally different from employees choosing to leave. Lumping them together in the same calculation produces a number that conflates very different situations. Most HR software separates these at the data entry stage. Use that separation in reporting.


How Retention Rate Connects to Recruitment

There is a direct and underappreciated relationship between how you recruit and what your retention rate looks like twelve months later.

Early attrition — the first six months — is almost always predictable from the recruitment process. Candidates who were given an accurate picture of the role, assessed for genuine fit rather than just capability, and onboarded with clear expectations are less likely to leave than those who experienced any of the opposite.

The organisations we work with that track retention by hiring source — comparing how candidates from different channels perform over time — consistently find that quality of hire at the point of recruitment is the strongest predictor of retention. Which means improving the retention rate calculation starts not with an intervention programme but with a better brief and a more honest job description.

How to measure employee retention is a useful capability. Understanding that the number you're measuring is partly an output of decisions made during recruitment is the insight that connects the metric to something you can actually change.


How SquareLogik Approaches Retention Measurement

We track retention for the candidates we place — at three months, six months, and twelve months — because the placement fee is only the beginning of whether the hire worked.

This data feeds back into how we approach future briefs for the same client. If placements into a particular role or team are consistently short-tenured, that's a signal about the role, the environment, or the brief — and it's worth having the conversation before the next search rather than discovering it in the exit interview.

If your organisation doesn't currently calculate its retention rate consistently, or is calculating it without segmenting it in ways that make it actionable, that's a gap worth closing. It's also a straightforward one — the formula is simple, and the data you need is almost certainly already sitting in your HRIS waiting to be used.


Frequently Asked Questions

What is the employee retention rate formula?

Employee retention rate equals the number of employees who remained throughout a given period divided by the number employed at the start of that period, multiplied by 100. For example, 170 employees remaining from a starting headcount of 200 produces a retention rate of 85%. The formula is consistent across periods — annual, quarterly, or monthly — with the period-specific headcount figures substituted accordingly. Clear definitions of who counts as "employed at the start" are essential for the calculation to be comparable over time.

How do you calculate staff retention rate monthly?

Apply the same formula using monthly headcount figures — employees remaining at month end divided by employees at month start, multiplied by 100. A monthly retention rate of 98% sounds healthy but annualises to approximately 78%, which is a meaningfully different figure. Monthly calculations are useful for identifying when attrition is accelerating, but monthly figures should always be considered alongside the annualised equivalent to give them context.

What is a good employee retention rate in the UK?

An annual retention rate of 85 to 90% is broadly considered healthy across most UK industries, representing 10 to 15% annual turnover. Sector benchmarks vary significantly — professional services and technology typically achieve 90% or above, while social care, hospitality, and retail frequently operate below 80%. The most useful benchmark is your own trend compared to your sector average. A retention rate improving year-on-year from a below-average position tells a more positive story than a static figure at the industry mean.

How do you measure employee retention by department?

Apply the standard formula to each department's headcount figures separately — employees remaining in that department divided by those employed there at the start of the period, multiplied by 100. Departmental segmentation is where the company-wide figure becomes genuinely diagnostic. Significant variance between departments almost always points to management quality, role design, or culture issues that are invisible in the aggregate figure. Tracking this consistently over time identifies persistent problem areas before they become attrition crises.

How is new hire retention rate calculated?

New hire retention rate tracks the proportion of employees from a specific hiring cohort who remain in post at a defined point — typically three, six, or twelve months after joining. Divide the number of that cohort still employed at the measurement point by the total number hired in the cohort, multiplied by 100. This calculation is the most sensitive early indicator of onboarding problems and hiring quality. A new hire retention rate significantly below the overall retention rate points to something happening specifically in the early employment period.

What is the difference between retention rate and turnover rate?

Retention rate measures the proportion of employees who stayed; turnover rate measures the proportion who left. They are not simply inverses of each other — turnover rate typically accounts for the number of departures relative to average headcount over the period, while retention rate compares end-state to start-state headcount. Both are useful. Retention rate is more useful for benchmarking and trend analysis; turnover rate, particularly when broken into voluntary and involuntary components, is more useful for understanding the nature and cost of attrition.

June 2026
Read time

How to Improve Employee Retention

The best employee retention strategy is a good hiring process. Here's what the main drivers of retention actually are and what works today.

Most organisations treat employee retention as a problem that starts when someone books a meeting with HR.

By that point, the decision has usually been made. The meeting is administrative. The exit interview produces answers that are diplomatically incomplete, the feedback goes into a document nobody reads, and the same conditions that drove the departure remain entirely intact for the next person in the role.

Improving employee retention — actually improving it, not just responding to attrition — requires working considerably further upstream than that. It starts before someone joins, runs through how they're onboarded, depends heavily on how they're managed, and is either supported or undermined by the working environment on a daily basis.

None of this is complicated. Most of it, however, requires treating retention as a deliberate strategy rather than a reactive scramble.


What Is a Good Employee Retention Rate?

Before diagnosing the problem, it helps to know what you're measuring against.

Employee retention rate is calculated by dividing the number of employees who stayed throughout a given period by the number employed at the start, multiplied by 100. A retention rate of 90% means one in ten employees left during the period. Whether that's good depends entirely on the sector.

Across UK industries, an average annual retention rate of 85 to 90% is broadly considered healthy. Professional services, technology, and financial services typically achieve higher. Hospitality, retail, and social care run considerably lower — sometimes below 70% — reflecting the specific pressures of those labour markets.

The more useful benchmark is your own historical data compared to your sector average. A 90% retention rate for a law firm is mediocre. For a domiciliary care provider, it represents exceptional workforce stability. What matters is whether yours is improving, stable, or declining — and why.


The Main Drivers of Employee Retention

Research on what actually keeps people in roles is consistent enough to be trusted, even if it's consistently ignored.

Pay matters. Not exclusively, and not in the way that a pay rise alone ever fixed a fundamentally broken environment. But being materially below market rate is a constant background irritant that resurfaces every time a recruiter reaches out on LinkedIn. People stay when they feel fairly compensated. They don't stay because of table tennis tables or free fruit, unless those things happen to coincide with everything else being fine.

Management quality is the driver most underestimated and most consequential. The research finding that people leave managers, not companies, has been repeated so often it's become a cliché — which hasn't made it any less true. How management style affects employee retention is direct and measurable: teams led by managers who give clear expectations, regular feedback, and genuine recognition retain staff at higher rates than those managed by people who do the opposite. Poor management doesn't usually manifest as a dramatic event. It accumulates as small, daily signals that this place doesn't particularly value you.

Belonging and purpose matter more than employers often acknowledge. People stay where they feel part of something, where their contribution is visible, and where the work itself has some meaning beyond the hours. This is not exclusively the preserve of mission-driven organisations. A logistics manager who understands how their work fits into the wider operation, and whose manager communicates that clearly, is more retained than one doing identical work in a context that treats them as a unit of output.

Growth and development are consistently cited by employees as reasons to stay — and by leavers as reasons they left. Does training increase employee retention? The evidence says yes, consistently. Employees who are learning, developing, and progressing have a reason to stay that isn't just present comfort. Those who aren't tend to stagnate quietly until a better option appears.


Onboarding: The Underrated Retention Window

How onboarding can improve employee retention is straightforward in theory and badly handled in practice.

The first ninety days of employment are disproportionately predictive of long-term retention. A new employee who reaches the end of their first month with a clear sense of their role, their team, and what success looks like is in a fundamentally different position from one who spent the first fortnight waiting for their laptop and the third week wondering who they're supposed to ask when they have a question.

Poor onboarding doesn't just create a slow start. It creates doubt. And a new employee who is doubting their decision at week three is a resignation risk at week twelve, often over something that was entirely predictable.

Effective onboarding is structured, not spontaneous. It sets clear expectations before someone starts, provides a genuine introduction to the team and the culture, assigns a clear point of contact, and checks in formally at thirty, sixty, and ninety days. It treats the new employee's experience as something that requires deliberate management — not something that will sort itself out once they find their feet.

This is especially relevant for smaller organisations. How to improve employee retention in a small business is largely a question of onboarding and management quality, because the formal retention programmes available to large employers — career pathways, L&D budgets, internal mobility — are simply not available at the same scale. What small businesses can do is onboard well and manage well. Both are free. Neither requires a headcount of five thousand.


How Benefits Affect Employee Retention

Benefits matter — but less uniformly than benefit vendors would have you believe.

How benefits affect employee retention depends almost entirely on whether the benefits in question address things the employee actually values. Gym memberships do very little for a workforce that works nights. Enhanced parental leave is transformatively attractive to employees at a certain life stage and irrelevant to others. Healthcare cover, genuine flexible working, and enhanced annual leave consistently score higher on employee surveys than most perks-based benefits — because they address real, daily quality of life rather than occasional use cases.

The benefits that retain people are the ones that remove sources of friction from their working lives. The ones that look good on a jobs page but don't affect the daily experience of working somewhere are decorative. Worth having, but not worth mistaking for a retention strategy.

Flexible and hybrid working has moved from benefit to expectation in most professional roles. Organisations that haven't genuinely grappled with this — that offer flexibility in theory but culturally expect presence — are losing people to those that have. Not always. But consistently.


The Recruitment Connection

The strongest lever for improving employee retention is the quality of the original hire.

A person who was genuinely right for the role — whose values match the organisation's culture, whose expectations of the job were set realistically during recruitment, who was hired against clear criteria rather than time pressure — is far less likely to leave within twelve months than one who wasn't.

The employees who leave earliest are almost always those for whom something in the recruitment process was imprecise. The role was described differently from reality. The culture was presented aspirationally rather than honestly. The hire was made under pressure because the vacancy had been open too long and someone credible was available.

Improving how you hire — more specific briefs, more honest job descriptions, structured assessment that tests for genuine fit rather than interview performance, and realistic onboarding expectations set at offer stage — reduces turnover at the point before it becomes a retention problem. Which is the only point at which it's truly fixable.

This is where a good recruitment partner earns its place in the retention conversation. Not by filling roles quickly, but by filling them with people who were right for them — reducing the probability of an early departure before the employment relationship has fully begun.


How to Increase Employee Retention: A Practical Framework

Ensure retention improves by addressing it in sequence rather than all at once.

Start with data. Calculate your actual retention rate, segment it by team, tenure, and role type, and identify where the losses are concentrated. Attrition that's clustered in one department is a management problem. Attrition clustered in the first six months is an onboarding or hiring problem. Attrition spread evenly across the organisation is a culture or compensation problem. The intervention follows the diagnosis.

Review your onboarding process specifically. Is it structured or improvised? Does it set clear expectations? Does it involve formal check-ins at thirty, sixty, and ninety days? If not, this is the highest-return, lowest-cost improvement available to most organisations.

Talk to your managers. How management style affects employee retention is more within your control than most organisations acknowledge, because management style is influenced by training, expectation-setting, and feedback. Managers who don't know they're creating a flight risk won't change without that information. Regular, structured feedback on management quality — through skip-level conversations, anonymous surveys, or exit interview analysis — gives you the data to act.

Ask leavers the right questions. Exit interviews conducted by HR, asking pre-set questions that are diplomatically easy to answer, produce diplomatically easy answers. Exit conversations conducted three months after someone has left, when they've nothing to lose by honesty, produce considerably more useful data. Several organisations have moved to this model for precisely this reason.


How SquareLogik Approaches Retention

We think about retention as part of the recruitment process rather than separate from it.

That means being specific about culture, role realities, and expectations during the brief rather than presenting every opportunity optimistically. It means assessing candidates for genuine fit — values, working style, realistic career expectations — not just capability. And it means following up after placement to understand whether the hire is working, because that feedback is what improves the next one.

It is because of this that our placements tend to stay for far longer than average.

The organisations that retain people best aren't necessarily the ones paying the most. They're the ones that hired thoughtfully, onboarded properly, and manage consistently well. Those things are all connected — and they all start with getting the right person through the door in the first place.


Frequently Asked Questions

What are the main drivers of employee retention?

The most consistent drivers are management quality, fair compensation relative to market, genuine opportunities for growth and development, a sense of belonging and purpose, and working conditions that reflect a reasonable quality of working life. Of these, management quality has the most direct and measurable impact — people leave managers more consistently than they leave organisations. Benefits and perks contribute, but only where they address real daily friction rather than providing occasional use cases.

What is a good employee retention rate?

Across UK industries, an annual retention rate of 85 to 90% is broadly considered healthy, though this varies significantly by sector. High-pressure, lower-paid sectors like hospitality and social care typically run lower; professional services and technology typically run higher. The more meaningful benchmark is your own historical trend compared to your sector average — whether retention is improving, stable, or declining, and where losses are concentrated, tells you considerably more than the absolute figure.

How does onboarding improve employee retention?

The first ninety days are disproportionately predictive of whether someone stays long-term. Poor onboarding creates doubt about the decision to join, which becomes a resignation risk within months. Structured onboarding — with clear expectations, a named point of contact, and formal check-ins at thirty, sixty, and ninety days — significantly reduces early attrition. It is the highest-return, lowest-cost retention intervention available to most organisations, and consistently the most neglected.

Does training increase employee retention?

Yes, consistently. Employees who are learning, developing, and progressing have a forward-looking reason to stay. Those who aren't tend to stagnate until a role elsewhere provides the development the current one doesn't. The effect is strongest when development is connected to a visible career pathway rather than being a series of unconnected training events. Even in small businesses where formal L&D budgets are limited, mentoring, stretch assignments, and clear progression criteria provide the same psychological benefit at minimal cost.

How does management style affect employee retention?

Directly and significantly. Teams managed by people who set clear expectations, give regular feedback, recognise good work, and address problems promptly retain staff at measurably higher rates than those managed by people who don't. Poor management doesn't usually produce a single dramatic departure-triggering event — it accumulates as a daily signal that the organisation doesn't particularly value the individual. Improving management quality, through training, feedback, and accountability for people management outcomes, is one of the most powerful levers available for improving retention across an organisation.

How do benefits affect employee retention?

Benefits retain people when they address things employees genuinely value in their daily working lives — genuine flexible working, healthcare cover, enhanced leave. They have minimal retention impact when they look good on a careers page but don't affect day-to-day experience. The most consistent finding in benefits research is that flexibility has moved from perk to expectation in most professional roles, and organisations that offer it in name but not in practice are losing people to those that offer it genuinely.